MTP CXP CFP loopback
- MTP CXP/CFP Loopback is used for testing the CXP/CFP transceiver ports by creating a loop of signal from transceiver to receiver within one MPO/MTP plug it forms optical link which allows testing of optical network segment by segment. It provides an cost effective way to evaluate CXP/CFP ports during R&D validation, product diagnostic and testing or field testing of device burn-in.
Product specifications
|
Temperature range
|
Indoor controlled environment (-10°C/+60°C) | ||
| Cable parameters |
Jacket material
|
N/A
|
|
|
Cable construction
|
Bare fibers | ||
|
Outer diameter
|
N/A | ||
|
Fiber count
|
24 | ||
|
Fiber type
|
SM OS2 or MMF OM3/OM4
|
||
| Temperature range | Operation: -10°C to +70°C | ||
| Storage: -25°C to +70°C | |||
|
Installation: -5°C to +50°C
|
|||
| Connector parameters | MTP SM | MTP MM | |
|
Compliance
|
US CONEC standard
|
US CONEC standard | |
|
Colour of housing
|
Green
|
Aqua/Magenta | |
|
Colour of boot
|
N/A | N/A | |
|
Polish
|
Angled (APC) | Flat (PC) | |
|
Insertion Loss
(acc. IEC 61300-3-4 method B)
|
<0,7dB
(@1310/1550nm)
|
<1,0dB (@850/1300nm) |
|
| Identification | Label with unique serial number. | ||
| Packaging |
Each assembly in sealed PE bag, bulk pack in cardboard box.
|
||
Documents
Partnumbers/Ordering codes
Related products
-
MTP QSFP loopback
MTP QSFP Loopback is used for testing QSFP/QSFP+ transceiver ports by creating a loop of signal from transceiver to receiver within one MPO/MTP plug it forms optical link which allows testing of optical network segment by segment. It provides an cost effective way to evaluate QSFP/QSFP+ ports during R&D validation, product diagnostic and testing or field testing of device burn-in.READ MORE